CUSTOM SOLUTION: Fit-Right™ Frame Adjustable Walk Gate Kit fits openings of 24" to 72" wide is ideal for when you need a custom solution for a special sized gate opening
COMPLETE GATE KIT: Includes everything you'll need to build a chain link walk through gate. Steel gate frame, powder coated chan link, lockable latch, gate hinges, steel wire ties (posts and post hinges not included)
DRIVE-THROUGH DOUBLE GATE: Purchase 2 kits and a UL301 Drop Rod kit for building a double gate drive through up to 12' wide
The Adjust-A-Gate chain link gate kit is installed on-site to perfectly fit your gate opening every time
RUST, FADE & CHALKING FREE
From a powder coated black finish
ANTI-SAG CHAIN LINK
This gate hardware kit has a patented truss cable system that keeps your gate from sagging or dragging
Video Transcript
Exciting new product called the Fit Right gate in a box. Now, when building a fence gate, it's very important that it fits exactly, otherwise your gate isn't going to function or latch properly. If you're not able to, to space the posts out correctly due to underground obstructions. Well, if that's the case, the Fit Right assembly is for you. Everything you need is right here in the box: steel frame, wire and all your fittings. Now it's important to know that the Fit Right assembly is made for a 72 inch opening. It's also important to know how to measure it correctly. So we measure from inside fence posts to inside fence posts. I'm at 63 and a half inches, so that means I'll need a soft eight and a half inches for it to fit appropriately. Okay. So I went ahead and marked off my eight and a half inches off both the top and bottom spreader bar. Now I'm going to take a Hacksaw and saw that eight and a half inches.
We're now going to assemble the latch side vertical with the hinge side vertical, for the top and bottom spreader bars. There are four set screws applied one for each corner. Now let's go ahead and install the diagonal trust. Now let's put on the chain link mesh. Here's something you probably haven't seen before. We're going to go ahead and take off the excess chain link fence. The next step is really easy. All we do is we insert the gate rods and attach them to the frame. Let's tie the top of the chain to the top rail and the bottom chain to the bottom rail. And the gate is complete. What, we're all finished.
Total build time less than one hour. Now, remember talk to your home center professional about all the adjusted gate options available in chain link, wood, vinyl, and composite. Well, that's it for now. Remember what they say? A good fence makes a good neighbor, until next time.
Free Shipping
Easy Returns
Lifetime Warranty
Product Overview
Always the perfect size. Even if those interior openings aren’t.
Unevenly spaced interior openings are a gate installer’s worst nightmare, but here’s a contractor’s dream come true: The pro-grade Fit-Right Gate System. With models in 4 and 6’ high that expand from 24” to 72” wide, it’s fast and easy to build tight-tolerance gates, on-site, the first time. Even if your postholes are offset or not the perfect widths, it’s no longer an issue. Just telescope the top and bottom rails to size and secure with the included tap screw, attach the chain link and trim, then mount. As with any of our products, Fit-Right Walk Gates are built sturdy to eliminate any potential sagging or dragging issues. Simply put, they’re the definitive answer for fencing contractors interested in increasing crew efficiency and significantly decreasing the amount of wasted material hanging around the boneyard stockpile. Each kit includes telescoping frame, hinges and latch, chain link, hardware and a truss-cable kit.
The main features of the gate frame kit include:
Built on-site to fit your gate opening perfectly - Works with chain link fence
Contractor quality, DIY friendly - Comprehensive easy to understand illustrated instructions included
This is the perfect gate building kit for homeowners and contractors alike. Over ONE Million Installed, Internationally. Simply the Best Gate Frame Available.
